Maize single plant nursery directional transplant technical points

1. Select good varieties: select mid-dwarf corn varieties with moderate growth period, compact plant type, and strong resistance, such as “Sichuan Dan Series”, “Ziyu Series”, and “Yayu Series”.
2, single seedlings directional transplant 1 nutrient soil preparation: You can use nutrient group seedlings, nutrition earth, nutrition tray seedlings and other methods. The nutrient group seedlings were finely grated with 20% of the fine soil and 70% of the fine earth, plus 5% calcium (or compound fertilizer), mixed and mixed, and then made into a nutrient group with a ball mold. The production of nutritious earthwork is similar to the use of soil for nutrients, but the humidity is relatively high. The practice is to compact the nutrient soil on the seedbed (thickness: 10cm), and cut the nutritious soil with bamboo or cutter into 55cm square. Nutrient soil blocks, with a fine wooden stick inserted in each piece of nutritious earth a depth of about 2cm sowing hole, acres need to grow 4.5 feet long, 4 feet wide. The underground pests such as tigers and caterpillars at the seedling stage were sprayed with phoxim 1000 times solution.
2 sowing: sowing before sowing 2 to 3 days, then soaking germination, to the beginning of "extension feet" can be sowing, sowing depth is not exposed on the soil surface is appropriate. In order to prevent the roots from being tied down, the nursery bed can be sunned or covered with a layer of waste film. After sowing, it is advisable to use carbon soot or fine soil to fill gaps between the turns or between bags to cover the seeds. Seedling watering at the right time, the seedlings are not suitable for wilting. 3 timely transplanting: in the first half of the wheat harvest nursery, plant two-leaf to three-leaf one-time transplanting is appropriate, but not later than the five-leaf transplant. When transplanting, the seedlings of the corn seedlings are directed to the rows, and the seedlings of the size and size are transplanted.
4 Transplanting specifications and density: Planting density should be determined flexibly according to species characteristics, altitude, soil thinness, etc., generally 3400 to 3700 per mu. The wide and narrow rows are planted in big rows of 3.6 to 4 feet, small rows of 1.8 feet and 6 inches in recessions; single row spacing is 2.7 to 2.9 feet and plant spacing is 6 inches.
3. Balanced formula Mid-layer fertilization: 40-50 kg of urea, 40-50 kg of superphosphate, 10-15 kg of potassium chloride per acre, and a certain amount of trace elements such as boron and zinc. The method of fertilization is to mix the required phosphorus and potassium fertilizers and high-quality decomposed farmyard fertilizers (above 1500 kg/mu) and then make a one-time base fertilizer into the middle of the soil tillage layer before transplanting; the first top dressing after transplanting corn seedlings About 15 days, 50% of the total amount of urea was used to remove manure (1000 kg/mu or more); the second top dressing was applied in the other 50% of the total amount of urea. Root dressing: Before planting, ten yuan boron fertilizer and 0.2% zinc sulfate were used for seed dressing. After spraying, the leaves were sprayed 12 times. Top dressing should be combined with cultivating and weeding at the same time.
4. Integrated control of diseases and pests: The main pests of corn in our county are earthworms and aphids. The control tigers in the seedbed stage are controlled by 1000 times spray of “phoxim”, combined with the “bottom insects” before the transplanting. Prevention of ground tigers; growth control of aphids with "anti-Wei Wei." Diseases are mainly sheath blight and leaf spot. Sheath blight is controlled by Jinggangmycin, and leaf spot is controlled by "carbendazim".

Introduction
FT-C08 is a handhold Ambulatory Blood Pressure Monitor which is designed according to oscillography principle and could 24 hours ambulatory monitor NIBP.It supplies the exact   estimation warrant, and applies to clinique, the hospital wards or family daily health care.

 

Features
Compact and portable,friendly interface, easy to use
24 hours ambulatory NIBP measure function,at best 358 pieces of ambulatory NIBP measure data can be recorded once.
Automatic measure and manual measure of the perfect combination,at best 99 pieces of NIBP measure data can be recorded once by manual measure.
High-definition color TFT display, strong visibility
The device can display low power prompt information, alarm information, error information and time information richly
Communicate with PC,PC software can achieve data review, analysis measure results,seeing trend graph, printing reports and other functions

 

Performance
NIBP          
Measure Method: Oscillometry
Measure Mode: The upper arm measure
Automatic Measure Interval: 15.30.60.120,240 minutes
Measure range: 0kPa(0mmHg)~37.57kPa(280mmHg)
Accuracy:  ±3mmHg
Pulse Rate   
Measure range:40bpm~240bpm
Resolution:1bpm
Alarm parameter: SYS / MAP / DIA
Power: DC 3V(Two "AA",1.5V Alkali Battery)
Product safety type:Type BF applied part (Internally powered,defibrillation-proof)

Physics speciality
Dimension: 106mm*75mm*31 mm (No including Packing)
Weight: <137g (Including Batteries)

Accessories
Cuff for adult
Disk (PC software)
User manual
USB data line
Pack

Software function
PC software is connect to the device by USB interface
Can download NIBP measure result of the terminal device
Can display scoop-shape trend graph,filling-type trend graph, histogram, pie chart, correlation line graph.
Can edit every piece of NIBP data, and add annotation to it.
Can edit basic information,doctor's advice information, NIBP status instruction, current medicine-taken information, etc.
Support print preview,print the report.

ABPM

Ambulatory Blood Pressure Monitor,Ambulatory Blood Pressure Meter,Ambulatory Blood Pressure Monitoring,24 Hour Blood Pressure Monitor

Changchun Yingwang Times Digital Co., Ltd. , https://www.ccsdsm.com