Seeding and fertilizer management: before the soil is frozen in autumn sowing, the spring sowing is generally from mid-March to early April, when the soil temperature at the surface of 10 cm reaches 8-10°C. The basal fertilizer should be applied to the nursery place, and the stalks should be smashed and irrigated with water after deep plowing. Drilling, spacing 20-25 cm, covering the soil 1 cm thick, and then cover the surface of a thin layer of grass or plastic mulch to keep the surface moist, remove the cover after emergence. Seeding rate of 4-16 kg per mu. Seedling height 4-5 cm seedlings, spacing 10-15 cm, 6-7 months per acre urea application of 10 kg, irrigation after application, timely cultivator weeding, rainy season pay attention to row of oysters, generally when the seedling height up to 70-100 cm. Rational fertilization can significantly increase production. The basal application of basal glycogen can be applied in autumn and autumn. The best fruit to be harvested after the autumn fruit is harvested. Each culm is circulated with 25 kg or so of compost, pay attention to fertilizer and soil, and apply water after application. Top dressing twice a year. The first time in the germination stage, it can promote the growth of the shoot, increase the fruit setting rate, and promote the growth of young fruit; after the second harvest, it can also be combined with the autumn application of base fertilizer, which is conducive to flower bud differentiation and root growth, and improves the leaf growth. The function of increasing the nutrient storage of the tree plays an important role in ensuring the increase of production in the following year. The top-dressing tree of the top-dressing tree is 0.25-0.5 kg of urea per time, and timely irrigation after top-dressing. In drought years in Gansu Province, it is necessary to pay attention to appropriate irrigation in April, May and June to ensure the growth of the shoots and the development of young fruit to meet the need of water and prevent serious fruit drop. Pepper is not resistant to maggots, and it is necessary to pay attention to drainage and flood prevention during the rainy season. Plastic pruning: prickly ash, light, strong branching, strong results mother bearing fruit ability, through pruning, concentrated nutrition, improve lighting to high yield and stable production. After the planting, it shall be dried at 40-50 cm. When the winter cuts, the lower branches of the main trunk shall be sparsely removed, and the upper 3-6 branches shall be reserved as the main branch. The selection of one year may be completed in two years, and the central standing branch may be removed. Shortcut 1/3 of the selected main branch, cut strong buds. Leave the first side branch at a distance of 50 cm from the middle, and then leave the second and third side branches every 30-40 cm. The branches that are too dense are left weak and strong, so that the branches inside and outside the crown are not pressed and distributed evenly. Everywhere they can reach into the fist, the light is good, and it is easy to harvest. Remove excessive branches and dense branches. Retracting the results from the branches to the strong buds at the back of the branches, promotes the development of strong branches, rejuvenation, and rejuvenation through such concentrated nutrition and the pruning method of the tree vigor has a significant effect on the growth of Zhuang trees. Summer pruning is usually performed 2-3 times a year. Its main function is to wipe out or remove the over-sized and unreserved use-valued backs, leggy branches and thin and weak branches. Litchi to improve light, concentrate nutrition, increase production.
Quantum Resonance Magnetic Analyzer:
Testing Technician's Duties Quantum Resonance Magnetic,Large Quantum Analyzer,Quantum Weak Magnetic Resonance Analyzer,Large Quantum Weak Magnetic Resonance Analyzer Shenzhen Guangyang Zhongkang Technology Co., Ltd , https://www.lighttherapymachine.com
1. The test technique of [Quantum BIO-Electric System] is very accurate, so the testing technician must learn with effort and an open mind, actively
accumulate experience and continuously improve the test technique.
2. During work, the testing technician should be in peace of mind and be kind, treat the tested person compassionately, earnestly and correctly operate and
accurately select the point.
3. Before testing, the testing technician should measure the tested person`s stature, weight, blood pressure and pulse and record the relevant items.
4. The testing technician should be responsible for cleaning, maintaining and storing the tester and the relevant equipment of Quantum BIO-Electric System.
The Quantum Magnetic Resonance Analyzer replaces the need for ultrasonic, nuclear magnetic resonance or radiography for various health related conditions. Holding sensors in your palm simply, health data will be collected within minutes from various body systems. The magnetic resonance analyzer offers new advantages in the field of material analysis. It has been shown that the applicability of such an analyzer exceeds the range of tissue analysis and other medical applications. The magnetic resonance analyzer measures the degree and type of response of a matter under test, and by comparison with reference matter it assists in recognizing deviations from the desired response. The software interface has updated high technology that the operation is more convenient and faster. The main future is 2 languages in software in one machine, both with English and another language.