Dried Tomato,Air-Dried Tomato Flakes,Dried Tomato Flakes,Sun Dried Tomato Flakes Jiangsu Tiankang Food Co., Ltd. , https://www.tiankangfood.com
This machine adopts adjustable intermittent feeding mechanism, reciprocating cutting machine or cutting pieces or segments of any thickness between 1 and 20mm, and simplifies the shifting mechanism and improves reliability.
Adjust the angle between the upper chain and the lower chain according to the foaming of the medicine, and pay attention to adjusting the adjusting screw between the upper and lower chains to make the sprocket chain elastic.
Check if the blade is blunt. If there is a gap or grinding, the blade should be ground before use. The angle between the front and rear of the reciprocating cutter blade is guaranteed to be between 22 and 24 degrees.
Align the red line of the thickness adjustment plate with the sign digital scale to cut the thickness of the tablet.
Check whether the electrical system is in good condition before power-on. After turning on the power, first idling (note: not allowed to reverse), observe whether there is any abnormality, and if there is any fault, eliminate it in time.
Before cutting the reciprocating cutting machine, check whether the direction of rotation of the feed adjustment is consistent with the direction of the arrow of the sign (refer to the reverse). Any two-phase power line should be exchanged to make the direction of rotation consistent.
When handling, it is necessary to prevent metal and other impurities from entering, so as not to damage the blade or cause the pieces to be mixed. If abnormal phenomena are found, stop the vehicle in time to check the cause and eliminate the fault.
The operator should spread the evenly when applying the medicine, the thickness should be appropriate, avoid the unevenness of the foaming, and the thickness should be thin and thin. If it is blocked, immediately hit the anti-vehicle to withdraw the medicine, or stop the cleaning.
Chain tension adjustment: The upper and lower chain is the conveying device. It should be removed and removed frequently: loosen the adjusting bolt and pull out any chain plate shaft. Turn the flywheel to take the upper and lower chain out for cleaning. After cleaning, the chain plate is installed and then inserted into the chain plate shaft, and the bolts are adjusted so that the chain is tight and the chain can not be inclined.
Method of operation
Before using the machine, you must be familiar with the structure, working principle, adjustment method, operation method and maintenance knowledge of the machine.
Lubricate the lubrication points as required before driving.
Check the clearance between the blade and the drug dispensing screen machine, which should be kept between 0.2 and 0.5 mm. If it is not met, it should be adjusted.
Adjusting the angle of the upper chain: Before the medicine washing machine cuts the medicine according to the shape of the medicine, the medicine machine adjusts the inclination of the upper chain. For example, when processing the light bulb Chinese herbal medicine, the latch handles 1, 2 are pulled out outward, and the upper frame is lifted up to insert the bolt into the hole with the inclination angle of 15°. The upper frame can be lifted up to a 90° position during cleaning. Eli clean up.
Adjustment of the feed wedge intermittent device: the straight-cut cutting machine loosens the nut 1, adjusts the nut 2, and can adjust the gap between the wedge and the sheave, and then tighten the nut 1 after adjusting.
Reciprocating cutting machine structure characteristics and operation method
Structural characteristics and requirements