The granule packing machine has been widely used in various industries, and it plays a very important role in the production process of the product. The automatic granule packing machine can automatically complete the metering, bag making, filling and sealing in the packaging process. All work such as cutting, counting, hot pressing batch number, all Chinese display, stepping motor pull bag, electric eye tracking, cursor positioning, simple operation, beautiful appearance and so on.
The design adopts unique embedded sealing, reinforced heat sealing mechanism, intelligent temperature controller temperature control, good heat balance to adapt to various packaging materials, performance number, low noise, clear sealing texture and strong sealing; according to user needs By changing the tool, the in-line cutting and the pattern cutting can be cut off in a straight line, so that the cutting knife can be stable and reliable when the bag is cut.
Many users have reported that the automatic granule packaging machine will not appear in the process of packaging production, which has greatly affected the production efficiency and packaging effect of the automatic granule packaging machine. What is the reason for this situation?
1. The reason why the equipment does not pocket the bag and does not put the bag is usually due to problems with the pocket switch, the bag release switch, the solenoid valve or the cylinder that controls the bag.
2. If the rough feed gate cannot be opened or closed, there is usually a problem with the solenoid valve or cylinder that controls it.
3. If the fine feed gate cannot be opened or closed, it is usually a problem with the solenoid valve or cylinder that controls it.
4. After the material is weighed, if the material door discharge and loose bag cannot be opened automatically, if the manual discharge button is not used, it is generally a problem with the solenoid valve or cylinder for controlling the material discharge. After replacing the spare parts It will return to normal. If the manual discharge button is available, it indicates that the weighing is out of tolerance or the system setting has an error.
5. After the material is weighed, if the weighing hopper is put into the bag, the bag will be loosened automatically. This kind of failure is not common, but it is representative. This phenomenon indicates that the automatic weighing machine has the end of the most weighing cycle, and all the conditions are in line with the requirements of automatic cutting, that is, the solenoid valve is over-powered, and the control cylinder is over, but the cylinder stroke is insufficient.